Removing The Lifter Wire - Canon NP6330 Service Manual

2. Removing the Lifter Wire

1) Remove the paper deck.
2) Remove the deck front cover.
3) Remove the two screws
from both front and rear.
4) Mark the position of the latch assembly, and remove the latch assembly by removing
the mounting screws
COPYRIGHT © 1997 CANON INC.
from the inside of the deck, and remove the guide plate
Figure 8-609
on both left and right (4 in total).
Figure 8-610
Figure 8-611
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 PAPER DECK PEDESTAL
8-21