Removing The Blade - Canon NP6330 Service Manual

2. Removing the Blade

1) Remove the developing assembly from the copier.
2) Remove the two screws
3) Place a newspaper on the floor or a desk, and pour out the toner from the developing
assembly.
4) Remove the two screws
Note:
The blade must be mounted with high accuracy. Do not remove it on its own in the
field. Rather, remove it together with its mount.
COPYRIGHT © 1997 CANON INC.
, and remove the developing assembly cover
Figure 4-337
, and remove the blade
Figure 4-338
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
together with the mount.
.
4-43