Setting The Deck Size - Canon NP6330 Service Manual

Hide thumbs Also See for NP6330:

Table of Contents

3. Setting the Deck Size

To change the paper deck size, change the position of the guide plate at the front,

rear, and rear left.

1) Slide out the deck toward the front until it stops.

2) Remove the mounting screw from the guide plate at the front, rear, and rear left;

then, remove the guide plates.

3) Fix each guide plate in position referring to the size indexes on the base plate, front

side plate, and guide plates.

Stopper (rear)

Stopper (left)

Figure 8-618

Figure 8-619

CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)

CHAPTER 8 PAPER DECK PEDESTAL

Stopper (front)

Table of Contents