Canon NP6330 Service Manual page 33

CHAPTER 1 GENERAL DESCRIPTION
Display Function
Turning on or off auto
sorting
Changing default binding
margin width
Turning on and off back
binding margin only
Switching between
millimeter and inch
notations
Setting auto energy
saver mode
Resetting user mode
Storing standard mode
Resetting standard
mode
: Factory mode
* 1
Density : AE (Automatic Exposure)
Paper selection : Auto Paper Selection
Copy count : 1
Ratio : Direct (100%)
Paper output : Non-sort
1-18
Description
Use it to enable or disable auto-
matic sorting for multiple originals:
ON:
OFF:
Use it to set the default width for
the binding width between 1 and
20 mm in 1-mm increments.
Use it to allow or not allow a back
binding margin when making one-
sided copies of two-sided originals
and two-sided copies of one-sided
originals with a binding margin:
ON:
OFF:
Use it to select between millimeter
and inch notations as the unit of
input length:
-1:
-0:
Use it to set the time for entering to
anto energy saver mode.
The time can be set between 15
and 90 min in 15-min increments.
Use it to reset user mode settings
by selecting "on" and pressing the
OK key.
Use it to store the mode to be
selected in response to the Reset
key by selecting "on" and pressing
the OK key.
Use it to reset the standard mode
to default (factory)*
selecting "on" and pressing the OK
key.
COPYRIGHT © 1997 CANON INC.
Enable auto sorting.
Disable auto sorting.
Allow binding margin on
back only.
Allow binding margin.
in millimeters
in inches
1 settings by
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Default settings
ON
10 mm
OFF
mm
15 min
OFF
OFF
OFF