CHAPTER 11 TROUBLESHOOTING
D. Pick-Up/Feeding System
1
Orientation of the Pick-Up Roller
When installing the pick-up roller
marking
on the rubber portion is toward the front of the copier.
• Use the brass-colored collar at the front.
• Use the silver-colored collar at the rear.
2
Orientation of the Separation Roller
When installing the separation roller
D-cut is toward the front.
11-34
Figure 11-237
(rear)
Figure 11-238
COPYRIGHT © 1997 CANON INC.
to the pick-up assembly, be sure that the round
(front of copier)
Collar
to the pick-up assembly, be sure so that the
(front of copier)
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)