Orientation Of The Feeding Roller Of The Deck/Cassette Pickup Assembly; Removing The Separation Roller - Canon iR5000 Service Manual

9.2.7 Orientation of the Feeding Roller of the Deck/Cassette Pickup As-
sembly
When mounting the feeding roller assem-
bly [1] to the cassette pickup assembly, be
sure that the belt pulley [2] is at the front of
the machine.
Check to make sure that the
protrusion in the roller plate and
the roller are engaged securely.

9.2.8 Removing the Separation Roller

1) Remove the two mounting screws [1],
and detach the feed guide plate [2];
then, detach the open/close guide [3].
(Skip this step for the left deck pickup
assembly.)
2) Remove the two mounting screws [4],
and detach the separation roller assem-
bly [5] form the joint.
(For the left deck pickup assembly, re-
move one screw [6].)
COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
CHAPTER 5 PICK UP/FEEDING SYSTEM
(front)
[2]
F05-902-09
[2]
[1]
F05-902-10
Cassette 3/4
Right deck pickup assembly
[4]
Left deck pickup assembly
[5]
F05-902-11
[1]
(rear)
[3] [1]
[5] [4]
[6]
5-57 P