Adjusting The Pressure Of The Separation Pad (Multifeeder Assembly); Routing The Drive Belt - Canon NP6330 Service Manual

CHAPTER 11 TROUBLESHOOTING
9

Adjusting the Pressure of the Separation Pad (multifeeder assembly)

If double feeding or pick-up failure occurs during pick-up, adjust the position of the
pressure spring
If double feeding occurs, move the spring holder toward
If pick-up failure occurs, move the spring holder toward
10

Routing the Drive Belt

Route the drive belt through the gears and rollers as shown in Figure 11-246.
11-38
of the separaiton pad.
Figure 11-245
Figure 11-246
COPYRIGHT © 1997 CANON INC.
Drum drive belt
Drive belt
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.
.
Main motor
Pulley A
Pulley B