Canon NP6330 Service Manual page 315

CHAPTER 8 PAPER DECK PEDESTAL
5) Remove the pick-up roller from the rear, and remove the pick-up roller shaft from the
bushing at the rear.
6) Remove the drive belt
and the roller shaft
Points to Note
When attaching the feeding roller
the feeding roller is toward the rear of the pedestal.
8-32
from the feeding roller
.
Figure 8-634
Figure 8-635
COPYRIGHT © 1997 CANON INC.
, and remove the feeding roller
, make sure that the belt pulley
(front of pedestal)
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
attached to