Canon NP6330 Service Manual page 385

CHAPTER 11 TROUBLESHOOTING
b. Multifeeder
1) Start [4] in service mode, and select No. 412 using the keypad.
• The indicator indicates '412'.
2) Press the OK key.
• The indicator indicates 'A6'.
3) Set the manual guide plate of the multifeeder to A6R (105 mm).
4) Press the OK key.
• The indicator indicates 'A4r'.
5) Set the manual guide plate to A4R (210 mm).
6) Press the OK key.
• The indicator indicates 'A4'.
7) Set the manual guide plate to A4 (297 mm).
8) Press the OK key.
• The indicator indicates 'A6'.
9) Press the Reset key twice to end service mode.
11-44
Paper
Guide
Figure 11-253
COPYRIGHT © 1997 CANON INC.
Guide
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)