Guidelines For Programming Extensions - AT&T MERLIN LEGEND Release 3.1 System Manager's Manual

Centralized Telephone Programming
Console/Display Instructions
3 Select a programming option.
_
_
4 Go to either "Guidelines for Programming Extensions," "Copying Feature and
SA/ICOM Buttons," or "Copying Line/Trunk Button Assignments."
The following sections explain the use of menu selections for programming a
single extension, and for using the feature and SA/ICOM buttons and/or the
line/trunk button assignments of one extension as a template for programming
several extensions of the same type. For information about copying calling
restrictions from one extension to another, see "Copy Call Restrictions" in
Chapter 3 of System Programming .
NOTE:
You should use programming codes for centralized telephone programming;
however, you may also use the
programming screen for extensions as described in the next section. For
detailed information about the
Programming .

Guidelines for Programming Extensions

Review the items below before you begin to program extensions.
Refer to Appendix C in System Programming to locate the code for the
feature that you want to program, or use the List Feature menu (which
includes the
screen that appears when you are programming a feature (see Step 6 in
the following procedure). For more information about using the List
Feature menu, see Chapter 5 in System Programming .
If you enter a feature code incorrectly or enter a feature code that is not
appropriate for the selected button, you may hear a beep or see the
message
flashes. Press the button again and repeat the procedure.
If you program the wrong feature on a button, follow the steps below:
1. Press the button.
2. Select
3. Press the button again.
6–24
Managing the System
Additional Information
Select
.
option that is available on the
option, see Chapter 5 in System
option) by selecting
as the green light next to the button
(press 2 on the PC).
or
from the
1
2