Contents And Organization; Entries - AT&T MERLIN LEGEND Release 3.1 System Manager's Manual

Guides
Integrated Administration (a programming component of Integrated
Solutions software applications)
Multi-Function Module (MFM; a telephone adapter that affects and is
affected by system features)
Personal lines
Primary Rate Interface (PRI) and T1 switched 56 service
Programming
Queued Call Console (QCC)
System Renumbering (a programming procedure for changing extension
and/or line numbers)
Touch-Tone or Rotary Signaling (information about supporting the two
types of telephone signaling on the system)

Contents and Organization

The Feature Reference does not have chapters. Instead, each feature is a
section of the guide; the name of the feature explained in the section appears at
the bottom of each page.

Entries

Each entry in the guide explains a feature or set of features in great detail.
"At a Glance," a boxed table at the beginning of each feature description,
summarizes the following aspects of the feature or feature group:
Users Affected. Shows what category of users is affected by a feature.
For example, "Auto Dial" lists telephone users and Direct-Line Console
(DLC) operators as those affected by the feature. (From this you can
conclude that Queued Call Console (QCC) operators cannot use Auto
Dial.)
Reports Affected. Cites the Station Message Detail Recording (SMDR)
reports in which you can find information relating to the feature.
Modes. Lists the system operating mode or modes in which the feature is
used.
Telephones. Tells you which telephones can use the feature.
Programming Code(s). Lists the programming code(s) used to program
the feature on a button or turn it on or off.
Feature Code(s). Lists the feature code(s) you can use to activate the
feature or turn it off.
MLX Display Label(s). Lists the name as it appears on the MLX-20L
and/or other MLX telephones.
7–5
Learning More