AT&T MERLIN LEGEND Release 3.1 System Manager's Manual page 144

System Manager's Functions and Features
Lines, line buttons, fixed-feature buttons
(continued)
Copy line assignments, buttons, and features
from one extension to another.
Assign lines that can be answered without
operator involvement.
Adjust the ringing at an extension, including one
with a single-line phone or MFM.
Allow Drop, Transfer, and Conference buttons
to access either host or system features.
Maintenance
Back up and restore system programming.
Control what a caller hears while waiting (for
example, during transfer or while on hold).
Set up special phones for calls during a
commercial power failure.
Prevent DLC operators from accidentally
disconnecting callers.
Fix the hold timer when callers on hold are being
disconnected.
Find out about the Alarm button on operator
consoles or set up a special light or bell to
signal a system problem.
For noisy places: turn off microphone at a phone
so that a user hears voice pages but must lift
the handset to respond.
Type PROG Considerations
User CNT See System
Programming.
User SYS Hybrid/PBX only
User EXT System manager only for
SYS single-line or MFM
General SYS Behind Switch mode only Recall/Timed Flash
Sys Mgr SYS See System
Programming.
General SYS
General SYS
Operator SYS DLC operators only
General SYS
General SYS Operator consoles
User SYS MLX only; not for QCC
Feature Name
Extension Copy
Line Copy
Personal Lines
Ringing Options
Coverage
Music on Hold
Power Failure Transfer (PFT)
Hold
Direct-Line Consoles
Hold
Alarm
Microphone Disable