AT&T MERLIN LEGEND Release 3.1 System Manager's Manual page 270

Adding a DLC Operator Position
If you are adding a personal line, Loudspeaker Paging, or Pool buttons
(Hybrid/PBX only), assign the outside lines/trunks to the buttons on the
telephone following the instructions in "Assign Trunks or Pools to
Telephones" in the "Telephones" section of System Programming ,
Chapter 3.
NOTE:
You may choose to copy line/trunk button assignments that other
extensions have, for example, a Loudspeaker Paging button. For more
information, see "Copy Line/Trunk Assignments" in the "Telephones"
section of System Programming , Chapter 3.
Assign intercom or system access buttons by following the instructions in
"Assign Intercom or System Access Buttons" in the "Telephones" section
of System Programming , Chapter 3. Also, you may choose to use the
Copy Extension procedure described earlier in this chapter in "Copy
Feature and SA/ICOM Buttons."
NOTE:
This task requires an idle condition: Extension Forced Idle.
If the extension requires a dedicated voice or voice pair of extension
jacks to provide Voice Announce to Busy or to provide voice and data
features, identify it to the system as such by following the instructions in
"Analog Multiline Telephones with Voice Announce to Busy" in the
"Telephones" section of System Programming , Chapter 3, or the
instructions in "Data Features" in Chapter 4 of System Programming .
Assign other buttons, for example, Night Service, Send/Remove
Message, Camp-On, headset, Auto Dial, Forward, Pickup, or Group
Pickup, following instructions in Chapter 5, "Centralized Telephone
Programming," System Programming .
Program the telephone features following the instructions for each feature
in "Optional Telephone Features," "Optional Group Features," and
"System Features" in System Programming , Chapter 3, or in Chapter 5,
"Centralized Telephone Programming," System Programming .
When you have finished, file the form(s) with the rest of the planning
forms.
Programming Instructions
See the appropriate procedures in System Programming as noted in the task list
above.
Managing the System
6–51