TEC SX4T - B B/W Direct Thermal User Manual page 269

8. PERIODIC MAINTENANCE PROCEDURE
(5) When using the cutter unit, clean the cutter blade and the media path.
When cleaning the cutter, be careful not to be injured by the cutter blade.
1) Remove the cutter cover and the media guide cover.
Media Guide Cover
2) Wipe the cutter blade with a soft cloth or a cotton swab moistened with alcohol.
Wipe the media path with a soft cloth moistened with alcohol.
Cutter Blade
Media Path
NOTE: For the B-8204-QM, turn the cutter blade clockwise so as to clean easily.
WARNING!
B-8204-QM
Cutter Cover
B-8204-QM
8- 2
8. PERIODIC MAINTENANCE PROCEDURE
B-4205-QM
Cutter Cover
B-4205-QM
Cutter Blade
EO18-33012A
Media Guide Cover
Media Path