TEC SX4T - B B/W Direct Thermal User Manual page 132

1. OUTLINE
(7) Rewind full sensor (Transmissive sensor)
This sensor detects that the built-in rewinder is full when winding backing paper or printed
media onto the take-up spool. It is positioned at 316.4 mm (Tr side) and 272 mm (LED side)
from the platen. A rewinder full status is detected when the backing paper blocks the light from
the LED.
(8) Cutter home position switch (micro switch) for Swing Cutter
A cam positioned at the end of the cutter motor arm turns the micro switch on/off in accordance
with the cutter motion cycle (one rotation). The micro switch status indicates if the cutter is in
the home position.
Print Head
Platen
Backing Paper
272 mm
1-14
Pinch Roller
Take-up Spool
Rewind Full Sensor (LED)
EO10-33013A
1.5 ELECTRONICS SPECIFICATIONS
Rewind Full Sensor (Tr)
44.4 mm