TEC SX4T - B B/W Direct Thermal User Manual page 2

Precaution
This service manual is intended for use by service technicians, and designed as a guide for repair
& maintenance. The manual is intended to promote smooth service operations of the product in
the market place. It is not intended for any other purpose such as development or product
specifications. For questions regarding development or product specifications, please contact the
TOSHIBA TEC department in charge.
This manual may be changed or revised without notice. If you find any misprints or omissions,
please contact the TOSHIBA TEC Service Dept. (Ohito) promptly (Facsimile No. 0558-76-9842).
TOSHIBA TEC cannot be held responsible for any trouble which have been caused by misprints
or omissions.
The following related manuals contain additional specific information on using B-SX4T/SX5T
SERIES and can be referred to for more detailed information available from TOSHIBA TEC sales
headquarters.
• Interface/Communication Manual
• Supply Manual
• Specifications
Safety Summary
Personal safety in handling or maintaining the equipment is extremely important. Warnings and
Cautions necessary for safe handling are included in this manual. All warnings and cautions
contained in this manual and written inside or outside of the printer should be read and understood
before handling or maintaining the equipment.
Never modify the machine. Except for the addition of options as specifically provided for in the
service manual, change or modifications to the machine are not approved. Unauthorized changes
or modifications may not comply with your country's safety standards.
Safety Precaution
Electrical equipment is dangerous. Electrical shock from such equipment can cause death. Never
operate electrical equipment unless authorized to do so by a responsible authority.
In emergency work on electrical equipment is authorized, be sure that it is performed in strict
compliance with approved safety regulations.
The following safety precautions will help to ensure proper use of the printer:
• Turn off the printer before 1) opening the top cover for any reason, 2) attaching/detaching
any cable and memory cards.
• Disconnect the power cord whenever you are working inside the printer.
• Keep your work environment static free.