TEC SX4T - B B/W Direct Thermal User Manual page 265

7. PROGRAM DOWN LOAD
(5) On the main menu screen, perform Default Device setting and Default Path setting in the
following procedure.
1) Click on "Setting" on the upper left corner of the main menu screen.
2) Click on "Open" to show the sub menu screen as shown below.
Default drive selection
3) Click on the Search button to show the sub menu screen as shown below.
Select a directly to be required as the default path.
Drive selection
Directory selection
4) Click on the Select button and then the OK button. The default path setting is completed.
This setting will be effective next time you start up Windows.
Path
7- 4
EO18-33012A
7.3 FIRMWARE DOWNLOAD
Search button
OK button
Cancel button
Select button
Cancel button