TEC SX4T - B B/W Direct Thermal User Manual page 264

7. PROGRAM DOWN LOAD
(1) Turn on the printer power by the following procedure.
Turn on the power while holding down the [FEED]
key and [PAUSE] key and [RESTART] key.
Select the download mode or download mode 2 at the
right by pressing the [FEED] key or [PAUSE] key.
NOTE: Program downloading must be performed in the DOWNLOAD MODE. It cannot be
performed in On line mode or System mode.
(2) Turn on the PC power and start up Windows.
(3) Click on the START button to access the program menu.
(4) Highlight "TOSHIBA TEC", "B-SX" and "Dwnld", and click on "B-SX Downloader" to start up the
download program. The main menu screen will appear as shown below.
Setting menu
Power off
DOWNLOAD MODE A download mode menu is displayed.
DOWNLOAD MODE
DOWNLOAD MODE 2
7- 3
EO18-33012A
7.3 FIRMWARE DOWNLOAD