TEC SX4T - B B/W Direct Thermal User Manual page 123

1. OUTLINE
12) White or black background all types of characters are available.
13) Character rotation .......................... 0 , 90 , 180 , 270
14) Character strings rotation ............... 0 , 90 , 180 , 270
15) Type of line
(1) Horizontal line (2) Vertical line (3) Slant line (4) Square (5) Rounded Rectangle (6) Circle
16) Line Width ...................................... 0.1 to 0.9 mm can be specified (in unit of 0.1 mm)
17) Mechanism
(1) Batch mechanism
This is the standard mechanism which lets the printer print continuously without winding the
label or tag paper.
(2) Strip mechanism (B-SX4T series: Option)
When the strip module is attached, labels are stripped from the backing paper by the strip
shaft. The next label will not be printed until the preceding label is taken away. The backing
paper is wound onto the take-up spool. By installing the rewinder guide plate the tag paper
and label can be wound onto the take-up spool.
Strip Sensor
Strip Shaft
Ribbon
Ribbon End Sensor
Print Head
Platen
Black Mark
Sensor
Ribbon
Ribbon End Sensor
Print Head
Platen
Feed Gap
Sensor
Tag
Pinch
Roller
Feed
Roller
Label
Pinch
Roller
Feed
Roller
1- 5
1.4 BASIC SPECIFICATIONS
Take-up Spool
Rewind Full Sensor
EO10-33013A