TEC SX4T - B B/W Direct Thermal User Manual page 187

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
7) Tighten the two M-3x5 screws on the LAN interface board that were loosened previously.
(Refer to Caution.)
8) Secure the LAN interface board to the PCB support plate (when connecting to the Main PC board)
or PCB attachment plate (when connecting to the PCMCIA interface board) with the SM-3x6
screw.
When connecting to the Main PC Board
M-3x5 Screw
When connecting to the PCMCIA Interface Board
M-3x5 Screw
9) Reassemble the side panel (L) in the reverse order of removal.
NOTE: Precaution for the LAN cable connection
When connecting a LAN cable with the hooded connectors to the LAN interface board, it may
not be connected depending on the shape of the hood. In this case, move aside the hood,
connect the cable, and return the hood to the former position.
4.7 LAN INTERFACE BOARD (B-9700-LAN-QM)
SM-3x6 Screw
SM-3x6 Screw PCB Attachment Plate
4-30
EO18-33012A
PCB Support Plate