TEC SX4T - B B/W Direct Thermal User Manual page 196

5. SYSTEM MODE
NOTES: 1. Item from (2) through (10) are initialized to "0" after RAM clear.
2. If the print distance is 8.2m or less (B-SX4T) or 5.5m or less (B-SX5T), it is rounded
down and no data is added to the memory at power off.
3. If the count is 31 or less, it is rounded down and no data is added to the memory at
power off.
4. If the driving time is 32 sec. or less (B-SX4T) or 27sec. or less (B-SX5T), it is rounded
down and no data is added to the memory at power off.
5. When a sent command results in an error, the same number as the data capacity of the
command is counted by byte.
6. If the media distance covered is 50.0 cm or less, it is rounded down and no data is
added to the memory at power off.
Descriptions of the Parameters
#
(11) Feed length fine adjustment (PC), (KEY)
(12) Cut/strip position fine adjustment (PC), (KEY)
(13) Back feed length fine adjustment (PC), (KEY)
(14) Print tone fine adjustment (Thermal transfer), (PC), (KEY) -10 step to +10 step
(15) Print tone fine adjustment (Thermal direct), (PC), (KEY)
Ribbon take-up motor driving voltage fine adjustment
(16)
(PC), (KEY)
Ribbon feed motor driving voltage fine adjustment (PC),
(17)
(KEY)
(18) X axis fine adjustment
(19) Threshold manual fine adjustment for the black mark
sensor
(20) Threshold manual fine adjustment for the feed gap sensor 0.0V to 4.0V
(21) Character
(22) Baud rate
(23) Data length
Stop bit length selection
(24)
(25) Parity
(26) Transmission control code
NOTE: Since the resolution of the B-SX4T's print head is 8 dots/mm, setting the fine adjustment
value to "X.2mm" and "X.3mm" will become the same result. Therefore, "X.3mm" will be
printed regardless of "X.2 mm" settings. In the same way, "X.7mm" setting will be printed as
"X.8mm".
Item
5- 7
5.3 SELF-DIAGNOSTIC TEST
Contents
-50.0 mm to +50.0 mm
-50.0 mm to +50.0 mm
-9.9 mm to +9.9 mm (PC)
-9.5 mm to +9.5 mm (Key)
-10 step to +10 step
-15 step to +0 step
-15 step to +0 step
-99.5 mm to +99.5 mm
0.0V to 4.0V
PC-850 PC-851 PC-1252 LATIN9
PC-852 PC-855 PC-1253 Arabic PC-
857 PC-1250 PC-1254 PC-8 PC-
1251 PC-1257
2400: 2400 bps 38400: 38400 bps
4800: 4800 bps 115200: 115200 bps
9600: 9600 bps
19200: 19200 bps
7: 7 bits
8: 8 bits
1: 1 bit
2: 2 bits
NON: None
ODD: ODD
EVEN: EVEN
XON/XOFF: XON/XOFF
READY/BUSY: READY/BUSY (DTR)
XON+READY AUTO:
XON/XOFF+READY/BUSY (DTR)
XON/XOFF AUTO: XON/XOFF
READY/BUSY RTS: RTS
EO18-33012A
(See NOTE below.)
(See NOTE below.)
(See NOTE below.)