TEC SX4T - B B/W Direct Thermal User Manual page 201

5. SYSTEM MODE
(6) PC Card Slot Check
(7) Sensor 1 Check
The status of the Strip Sensor, Ribbon Feed Motor Sensor, Ribbon Take-up Motor Sensor,
Rewinder Overflow Sensor, Cutter Home Position Sensor, Print Head Up Sensor, and Print
Block Open Sensor are printed.
SENSOR1
Fixed to 0.
CARD SLOT 1
SLOT 2
PCMCIA Card
0 0 0 0 0 0 0 0 , 0 1 1 1 0 0 1 1
ATA
LAN
ATA: ATA Card is inserted.
LAN: LAN card is inserted.
FSH: Flash memory card is inserted.
NO: Unformatted ATA card/Flash memory
card or no card is inserted.
Slot
Printer head up sensor status
1: Head down
Cutter home position sensor status
0: Home position
1: Other position
Rewinder overflow sensor status
0: Normal
1: Overflow
Ribbon take-up motor sensor status
0: The detecting point is positioned outside the slit.
1: The detecting point is positioned inside the slit.
Ribbon feed motor sensor status
0: The detecting point is positioned outside the slit.
1: The detecting point is positioned inside the slit.
Fixed to 0.
Strip sensor status
0: The label is not detected.
1: The label is detected.
5- 12
5.3 SELF-DIAGNOSTIC TEST
Printer block open sensor status
1: Print head close
EO18-33012A