Incoming Calls Group - AT&T SYSTEM 25 User Manual

Incoming Calls Group

You may be in an Incoming Calls Group, also known as a
Direct Group Calling (DGC) group. Calls to an Incoming Call
Group are distributed among the group members. If you are
a member of a group, you can answer calls to the group on
your <LOOP> buttons in the same way as other incoming
calls. You can leave the group temporarily and return to it
by using the following procedures.
Leaving the Group Temporarily
1. Lift the handset and listen for dial tone.
2. Dial *4.
3. Listen for confirmation tone and then hang up.
Returning to the Group
1. Lift the handset and listen for dial tone.
2. Dial *6.
3. Listen for confirmation tone and then hang up.
Display: The access code you dial to leave or return to the
Incoming Calls Group is displayed on the screen until you
hang up.
54