18. Install a replacement server board. For instructions, see
on page
Installing a Server Board
1. Set the server board into place in the server chassis, inserting the I/O connector side
of the board first. Make sure the back panel I/O openings and the chassis standoff
line up correctly and use caution to make sure you do not pinch any cables.
2. Attach the server board to the system with the eight screws you removed earlier.
3. Install the processor(s). For instructions, see
4. Install the heatsinks. For instructions, see
5. Set the memory cage into place. See letter "A" in the figure below.
6. Secure the memory cage with the two screws you removed earlier. See letter "B" in
the figure.
102
102.
A
Figure 109. Installing Memory Riser Cage
"Installing a Server Board"
"Installing a Processor" on page
"Installing a Heatsink" on page
B
Intel® Server System SC5400RA User's Guide
70.
76.
AF001410