Removing The Intel ® Rmm And The Intel ® Rmm Nic; Figure 87. Installing The Intel ® Remote Management Module - Intel SC5400RA - Server System - 0 MB RAM User Manual

12. Install the chassis cover. For instructions, see
page
13. Plug all peripheral devices and the AC power cable into the server.
14. Power up the server.
Removing the Intel
1. Observe the safety and ESD precautions in
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord from the server.
4. Remove the chassis cover. For instructions, see
page
5. Disconnect the Intel
NIC. See letter "A" in the following figure.
6. Lift the bracket containing the RMM NIC from the server system. See letter "B" in
the figure.
Intel® Server System SC5400RA User's Guide
A
Figure 87. Installing the Intel
25.
®
RMM and the Intel
24.
®
RMM NIC cable from the server board and from the RMM
B
AF001517
®
Remote Management Module
"Installing the Chassis Cover" on
®
RMM NIC
"Safety Information" on page
"Removing the Chassis Cover" on
129.
81