Installing An Additional Hot-Swap Power Supply Module; Figure 91. Removing The Power Supply Filler Panel - Intel SC5400RA - Server System - 0 MB RAM User Manual

Installing an Additional Hot-swap Power Supply
Module
1. Observe the safety and ESD precautions in
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord from the server.
4. Remove the chassis cover. For instructions, see
page
1. Remove the screws from the filler panel. See letter "A" in the following figure.
2. Lift the power supply filler panel from the system. See letter "B".
Intel® Server System SC5400RA User's Guide
24.

Figure 91. Removing the Power Supply Filler Panel

"Safety Information" on page
"Removing the Chassis Cover" on
A
A
B
129.
AF000602
85