Removing And Installing The Chassis Cover; Removing The Chassis Cover; Figure 12. Removing The Chassis Cover - Intel SC5400RA - Server System - 0 MB RAM User Manual

Removing and Installing the Chassis Cover

Removing the Chassis Cover

The Intel
ensure proper cooling. You will need to remove the top cover to add or replace
components inside of the platform. Before removing the top cover, power down the server
and unplug all peripheral devices and the AC power cable.
Note: A nonskid surface or a stop behind the server system may be needed to prevent the system
from sliding on your work surface.
1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord.
4. Remove the access cover screw if it is installed. See letter "A" in the following
figure.
5. While holding in the blue button at the top of the chassis (see letter "B"), slide the
top cover back until it stops.
6. Lift the cover outward to remove it.
A
24
®
Server System SC5400RA must be operated with the top cover in place to
iii.
B

Figure 12. Removing the Chassis Cover

B
Intel® Server System SC5400RA User's Guide
"Safety
A
AF000555