Installing The Fan Set; Installing And Removing The 2.5" Backplane Board; Removing The 2.5" Backplane Board; Figure 65. Installing The Server Board - Intel H2312JFJR Service Manual

Hardware Installations and Upgrades

Installing the Fan Set

1. Place the fan set into the dock.
2. Connect the fan set cable to the connector on the NPD board.

Installing and Removing the 2.5" Backplane Board

Removing the 2.5" Backplane Board

1. Disconnect all cables from the backplane board.
2. Remove the four screws to release the backplane board from chassis.
3. Lift up the backplane board straightly to remove from the chassis holder.
42

Figure 65. Installing the Server Board

Intel
®
Server System H2000JF Family Service Guide