Guidelines For Installing Memory In The Ssh4 Server Board - Intel SPSH4 Technical Product Specification

Server system
Hide thumbs Also See for SPSH4:
Table of Contents

Advertisement

Physical Specifications
main memory. Memory scrubbing prevents the accumulation of single –bit errors in main
memory tha would become unrecoverable mult-bit errors.
Chipkill* - Chipkill is the ability of the memory system to wothstand a mult-bit failure within
DRAM device, including a failure that causes incorrect data on all bits of the device.
3.2

Guidelines For Installing Memory in the SSH4 Server Board.

Install only memory modules validated with this particular board. Refer to the Tested
Hardware and Operating System List and/or Http:// support.intel.com.
Bank 1 must be populated with Dimms first. See figure 9 above.
All four Dimms within a bank must be identical
Baseboard Management Controller (BMC) providing monitoring, alerting, and logging of
critical system information obtained from embedded sensors on baseboard
8 megabit Flash device for system BIOS
Three externally accessible USB ports; two at rear bulkhead and one at front panel
One IDE connector, supporting up to two ATA 66 compatible devices
14
SPSH4 Server System External Product Specification
Figure 9 SSH4 Memory Module
Revision 1.11

Advertisement

Table of Contents
loading

Table of Contents