Jumper Name
Password Clear
(J1D2)
BMC Force Update
(J1E3)
14
Pins
What Happens at System Reset
1 - 2
Protect password: These pins should be jumpered for
normal operation.
2 - 3
Erase password: If these pins are jumpered for 5 to 10
seconds, the password will be cleared on the next server
reset. These pins should not be jumpered for normal
operation.
To use this jumper to reset the password: Power down the
server. Place the jumper on pins 2 - 3. Power on the
server and wait 5 to 10 seconds. Power down the server.
Move the jumper back to pins 1 - 2. Power on the server.
1 - 2
Disable force update: These pins should be jumpered for
normal operation.
2 - 3
Enable force update: Jumpering these pins forces a BMC
update.
Figure 9. Configuration Jumpers
Intel® Server System SC5400RA User's Guide