Replacing The Control Panel - Intel SC5400RA - Server System - 0 MB RAM User Manual

Server system
Hide thumbs Also See for SC5400RA - Server System - 0 MB RAM:
Table of Contents

Advertisement

8. Install the chassis cover. For instructions, see
page
9. Plug all peripheral devices and the AC power cable into the server.
10. Power up the server.

Replacing the Control Panel

The steps for replacing the front control panel and the Intel
nearly identical. Use the following steps for both varieties of the control panel. Where
necessary, differences between the two control panels are noted.
Your server must be operated with a control panel installed.
Caution: The control panel is NOT hot swappable. Before removing or replacing the control panel,
you must first take the server out of service, turn off all peripheral devices connected to
the system, turn off the system by pressing the power button, and unplug the AC power
cord from the system or wall outlet.
1. Observe the safety and ESD precautions in
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord from the server.
4. Remove the chassis cover. For instructions, see
page
5. Remove the front bezel if it is installed. For instructions, see
Installing the Front Bezel" on page
6. Press the latch at the back of the control panel.
7. Slide the control panel out through the front of the server system far enough so that
you can reach the front panel and USB cable connectors at the rear of the control
panel.
8. Disconnect the front panel cable and the USB cable.
9. Slide the replacement control panel module into the server system.
10. Connect the USB cable and the front panel
11. (Optional) Install the front bezel. For instructions, see
Front Bezel" on page
12. Install the chassis cover. For instructions, see
page
13. Plug all peripheral devices and the AC power cable into the server.
14. Power up the server.
Intel® Server System SC5400RA User's Guide
25.
24.
26.
25.
"Installing the Chassis Cover" on
®
Local Control Panel are
"Safety Information" on page
"Removing the Chassis Cover" on
26.
cable.
"Removing and Installing the
"Installing the Chassis Cover" on
129.
"Removing and
83

Advertisement

Table of Contents
loading

Table of Contents