9. Firmly grab the PCI add-in card by its top edge or outer corners and lift it from the
expansion slot on the server board. Place the removed PCI add-in board in an anti-
static protective wrapper.
10. Close the back panel PCI add-in card retention device.
11. Remove additional PCI add-in card as necessary.
12. Reinstall the PCI add-in card retainer.
13. Install the front bezel. For instructions, see
Bezel" on page
14. Install the chassis cover. For instructions, see
page
15. Plug all peripheral devices and the AC power cable into the server.
16. Power up the server.
Intel® Server System SC5400RA User's Guide
A
Figure 63. Preparing System for Removal of PCI Add-in Card
26.
25.
A
B
"Removing and Installing the Front
"Installing the Chassis Cover" on
AF000600
59