Installing And Removing A Dvd-Rom Or Cd-Rom Drive; Installing A Dvd-Rom Or Cd-Rom Drive; Figure 56. Removing Emi Shield/Slide Assembly From Upper Device Bay - Intel SC5400RA - Server System - 0 MB RAM User Manual

Installing and Removing a DVD-ROM or CD-ROM
Drive

Installing a DVD-ROM or CD-ROM Drive

1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see
page
4. Remove the front bezel if it is installed. For instructions, see
Installing the Front Bezel" on page
5. Remove the EMI shield/slide assembly from the upper device bay by pressing the
two slide assembly latches inward. See letter "A" in the following figure.
6. Remove the slides from the EMI shield by pulling the slides away from the EMI
shield to release them from the EMI shield. See letter "B".

Figure 56. Removing EMI Shield/Slide Assembly from Upper Device Bay

7. Attach slides to the DVD-ROM or CD-ROM drive by pressing the slides firmly
into the side dimples on the DVD-ROM or CD-ROM drive.
Intel® Server System SC5400RA User's Guide
24.
A
"Removing the Chassis Cover" on
26.
A
B
"Removing and
B
AF000945
51