Installing The Fan Set; Replace Server Board; Removing Server Board; Figure 69. Removing The Node Fan Set - Intel H2000WP Series Service Manual

Hardware Installations and Updates

Installing the Fan set

1. Place the Fan set into dock.
2. Connect the Fan set cable to connector on NPD board.

Replace Server Board

Removing Server Board

1. Plug out the Computer Node Tray, See Figure 24. Pulling out the Node Tray
2. Remove Air Duct, See Figure 28
3. Remove Processors and Memory DIMMs is there are any
4. Remove Bridge Board, See Figure 59
5. Remove PCIe Riser on Slot 1, See Figure 45
6. Remove IO Module carrier on Slot 2 if there is any, See Figure 47
7. Disconnect Cables from Server Board.
42

Figure 69. Removing the Node Fan Set

Figure 70. Installing the Server Board

Figure 71. Removing cable connections from server board
®
Intel Server System H2000WP Family Service Guide