Figure 70. Removing Memory Riser Cards - Intel SC5400RA - Server System - 0 MB RAM User Manual

6. Pull the memory board(s) from the DIMM cage. See the following figure.
7. Push the clips at each end of the DIMM socket(s) outward to the open position. The
FBDIMM lifts from the socket.
8. Holding the FBDIMM by the edges, lift it from the socket. Store the FBDIMM in
an anti-static package.
Note: For your server system to be functional, DIMMs must be installed in sockets
9. Insert the memory board into the memory cage. Push down firmly to seat the
memory board into the socket on the server board.
10. Close the door on the memory cage and tighten the thumbscrew on the cage.
11. Replace the chassis cover. For instructions, see
page 25
12. Reconnect the AC power cord.
Intel® Server System SC5400RA User's Guide

Figure 70. Removing Memory Riser Cards

DIMM_A1 and DIMM_B1 on memory riser card 1, and in sockets DIMM_C1
and DIMM_D1 on memory riser card 2.
"Installing the Chassis Cover" on
AF001523
67