Figure 67. Installing Fbdimms - Intel SC5400RA - Server System - 0 MB RAM User Manual

9. Make sure the clips at each end of the DIMM socket(s) are pushed outward to the
open position. See letter "A" in
10. Holding the FBDIMM by the edges, remove it from its anti-static package.
11. Position the FBDIMM above the socket. Align the notch on the bottom edge of the
FBDIMM with the key in the DIMM socket. The arrow for letter "B" in
is pointing to the key in the socket.
12. Insert the bottom edge of the FBDIMM into the socket.
13. When the FBDIMM is inserted, push down on the top edge of the FBDIMM until
the retaining clips snap into place. See letter "C" in
14. Make sure the clips latch firmly in place. See letter "D" in
64
Figure 67.
C
D
A

Figure 67. Installing FBDIMMs

Intel® Server System SC5400RA User's Guide
Figure 67.
Figure 67.
B
TP000425
Figure 67