Installing The Server Board; Removing The Cover - Intel SR2100 Product Manual

Installing the Server Board

Installing the server board consists of the following steps:

1. Removing the cover.

2. Removing the riser card mounting bracket.
3. Mounting the server board in the chassis.
4. Cabling the server board to the other chassis components.
5. Adding processors and memory to the server board.
6. Installing PCI cards, riser card, and bracket.
7. Replacing the cover.

Removing the Cover

1. Unscrew the two captive thumbscrews on the rear of the system.
2. Pull the cover back and remove it from the chassis.
3. Set the chassis cover aside and away from immediate work area.
24
Figure 6. Removing the Cover
Intel SR2100 Chassis Subassembly Product Guide
OM11052