Installing The Server Board - Intel R1304BTSSFAN Service Manual

10. Replace the server board. For instructions, see
page
11. Install the processor. For instructions, see
12. Install the DIMMs. For instructions, see
13. Install the PCIe* Riser assembly. For instructions, see
Assembly" on page
14. Reconnect all cables to the server board.
15. Install the processor air duct. For instructions, see
Duct" on page
16. Install the server system cover. For instructions, see
Cover" on page
17. Plug all peripheral devices and the AC power cable into the server.

Installing the Server Board

1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System Cover" on page
4. Remove the processor air duct. For instructions, see
Duct" on page
5. Remove the PCIe* Riser assembly. For instructions, see
Riser Assembly" on page
6. Place the server board into the server system as shown by letter "A" in
7. Attach the server board with nine screws. See letter "B" in
®
Intel Server System R1304BTSSFAN/R1304BTLSFAN/R1304BTLSHBN Service Guide
59.
52.
31.
29.
iii.
28.
30.
51.
"Installing the Server Board" on
"Installing the Processor" on page
"Installing DIMMs" on page
"Installing the PCIe* Riser
"Installing the Processor Air
"Installing the Server System
"Removing the Server
"Removing the Processor Air
"Removing the PCIe*
Figure
36.
33.
"Safety
Figure 36.
36.
59