Table of Contents
Advertisement
Installing or Removing a Processor
Caution: Processor must be appropriate: You may damage the server board if you install a
processor that is inappropriate for your server. See
Software" on page ix
Caution: ESD and handling processors: Reduce the risk of electrostatic discharge (ESD) damage to
the processor by doing the following: (1) Touch the metal chassis before touching the
processor or server board. Keep part of your body in contact with the metal chassis to
dissipate the static charge while handling the processor. (2) Avoid moving around
unnecessarily.
Installing a Processor
Notes:
•
Do not touch the contacts on either the processor or the processor socket.
•
Do not force the processor socket into place. When correctly aligned, the socket will
easily drop into place.
To install a processor, follow these instructions:
1. Observe the safety and ESD precautions in
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord from the server.
4. Remove the chassis cover. For instructions, see
page
5. Remove the processor air duct. For instructions, see
Duct" on page
70
for a link to the list of compatible processor(s).
24.
68.
"Additional Information and
"Safety Information" on page
"Removing the Chassis Cover" on
"Removing the Processor Air
Intel® Server System SC5400RA User's Guide
129.
Advertisement
Table of Contents
