7. Remove the heatsink from the processor socket.
8. Push down on the lever attached to the processor socket. While holding the lever
down, pull it towards the center of the board to disengage the lever from the hook.
Fully open the lever. See
9. Push down on the rear tab of the load plate to swing the front of the load plate up
slightly. Fully open the load plate. See
72
Figure 74. Removing Heatsink
Figure
75.
Figure 75. Opening Processor Socket Lever
Figure 76. Opening Load Plate
AF001492
AF000095
Figure
76.
AF000096
Intel® Server System SC5400RA User's Guide