Table of Contents
Advertisement
14. Close the upper door of drive cage.
15. Tighten the captive screw.
16. If you removed the drive cage, slide it into the server system to re-install it.
17. Connect power and data cables to connectors on hard drive(s).
18. Install the front bezel. For instructions, see
Bezel" on page
19. Install the chassis cover. For instructions, see
page
20. Plug all peripheral devices and the AC power cable into the server.
21. Power up the server.
32
Figure 23. Closing Upper Door of Fixed Drive Cage
Figure 24. Tightening Captive Screw
26.
25.
AF000585
AF000586
"Removing and Installing the Front
"Installing the Chassis Cover" on
Intel® Server System SC5400RA User's Guide
Advertisement
Table of Contents
