Table of Contents
Advertisement
Hard Disk Drives
One drive cage that supports six cabled drives ships with the server system. An optional
hot-swap drive cage can be installed to replace the six-drive fixed drive cage. For
instructions on installing hard drives, see
on page
Note: Drives can consume up to 17 watts of power each. Drives must be specified to run at a
maximum ambient temperature of 45
The Intel
Information and Software" on page ix
Floppy / CD-ROM / DVD-ROM Slimline Carriers
For installation instructions on installing a floppy drive see
Slimline USB Floppy/CD-ROM / DVD-ROM Drive Combo" on page
instructions on installing a CD-ROM drive or DVD-ROM drive, see
Removing a DVD-ROM or CD-ROM Drive" on page
To use one of the slimline drives provided by Intel, use the following order codes:
•
Slimline CD-ROM Drive: AXXSCD
•
Slimline DVD/CDR Drive: AXXDVDCDR
•
Slimline Floppy Drive: AXXCDUSBFDBRK
Note: The Intel
DVD-ROM hard drives. See
Internet link to a list of supported hardware. Intel provides accessory kits for these drives.
Processor and Memory Requirements
To avoid integration difficulties and possible board damage, your system must meet the
requirements outlined below. For a list of qualified components, see the links under
"Additional Information and Software" on page
Processor
One or two Multi-Core Intel
of supported processors, see the links under
page
ix.
18
38.
®
Server System SC5400RA does not support all hard drives. See
®
Server System SC5400RA does not support all slimline floppy, CD-ROM or
"Additional Information and Software" on page ix
®
Xeon
"Installing and Removing Hot-swap Drive(s)"
o
C.
for an Internet link to a list of supported hardware.
51.
ix.
®
processors 5000, 5100, or 5300 sequence. For a list
"Additional Information and Software" on
Intel® Server System SC5400RA User's Guide
"Additional
"Installing and Removing a
42. For installation
"Installing and
for an
Advertisement
Table of Contents
