Installing And Removing Fixed Hard Drive(S); Installing Fixed Hard Drive(S); Figure 16. Removing Six-Drive Fixed Drive Cage - Intel SC5400RA - Server System - 0 MB RAM User Manual

Installing and Removing Fixed Hard Drive(s)

Installing Fixed Hard Drive(s)

1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see
page
4. Remove the front bezel if it is installed. For instructions, see
Installing the Front Bezel" on page
5. Optional: Remove the hard drive cage. The drives can be installed without
removing the drive bay from the system. For clarity, the figures below show the
installation process with the drive cage removed. If you find it easier to install the
drives with the drive bay removed:
— Push the blue plastic release mechanism upward to release the fixed drive cage.
— Pull the drive cage from the system. See letter "B" in the figure below.
— Position the drive bay horizontally before opening the drive cage doors.
28
24.
See letter "A" in the following figure.
A

Figure 16. Removing Six-drive Fixed Drive Cage

"Removing the Chassis Cover" on
26.
Intel® Server System SC5400RA User's Guide
"Removing and
B
TP001490