Cannot Enable Ficon; Switch Isl Isolated; Fabric Manager Or Device Manager Cannot Configure Ficon - Cisco 9134 - MDS Multilayer Fabric Switch Troubleshooting Manual

FICON Issues
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Cannot Enable FICON

Symptom
Table 16-2 Cannot Enable FICON
Symptom Possible Cause
Cannot enable No MAINFRAME_PKG license is
FICON. installed, and the grace period has
ended.

Switch ISL Isolated

Symptom
Table 16-3 Switch ISL Isolated
Symptom Possible Cause
Switch ISL is Switch WWN is not configured in the
isolated. fabric binding database.

Fabric Manager or Device Manager Cannot Configure FICON

Symptom
Table 16-4 Fabric Manager or Device Manager Cannot Configure FICON
Symptom Possible Cause
Fabric Manager or Switch is configured to disallow SNMP
Device Manager control over FICON.
cannot configure
FICON.
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
16-10
Cannot enable FICON.
Switch ISL is isolated.
Fabric Manager or Device Manager cannot configure FICON.
Solution
Install the MAINFRAME_PKG license to use FICON
features. Refer to the Licensing information at one of the
following URLs:
For Fabric Manager:
•
http://www.cisco.com/en/US/products/ps5989/produc
ts_configuration_guide_chapter09186a0080662c89.ht
ml
For CLI:
•
http://www.cisco.com/en/US/products/ps5989/produc
ts_configuration_guide_chapter09186a0080664c67.ht
ml
Solution
Add the sWWN to the fabric binding database for all
switches in the FICON fabric. Choose Fabricxx > VSANyy
> Fabric Binding in Fabric Manager, select the Config
Database tab, and click Create Row.
Alternatively, use the fabric-binding database vsan CLI
command to add a switch to the fabric binding database.
Solution
Use the snmp port control CLI command in FICON
submode to enable SNMP control for FICON.
Chapter 16 Troubleshooting FICON
OL-9285-05