Configuring An Alert Group Using The Cli; Configuring The Message Level For A Destination Profile Using Fabric Manager; Configuring The Message Level For A Destination Profile Using The Cli - Cisco 9134 - MDS Multilayer Fabric Switch Troubleshooting Manual

Chapter 25 Troubleshooting Call Home
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Click Apply Changes.
Step 4

Configuring an Alert Group Using the CLI

To configure alert groups for a destination profile, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# callhome
switch(config-callhome)#
Step 3
switch(config-callhome)# destination-profile
test1 alert-group environmental
switch(config-callhome)# destination-profile
short-txt-destination alert-group
environmental

Configuring the Message Level for a Destination Profile Using Fabric Manager

To set the message level for each profile for Call Home, follow these steps:
Choose Switches > Events > Call Home and click the Profiles tab in the Information pane.
Step 1
Set a message level for each switch using the drop-down menu in the MsgLevel column.
Step 2
Click Apply Changes to save your changes or click Undo Changes to cancel your changes.
Step 3

Configuring the Message Level for a Destination Profile Using the CLI

To configure message level settings for destination profiles, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# callhome
switch(config-callhome)#
Step 3
switch(config-callhome)# destination-profile
test message-level 5
switch(config-callhome)# no
destination-profile oldtest message-level 7
OL-9285-05
Purpose
Enters configuration mode.
Enters Call Home configuration submode.
Configures user-defined destination message
profile (test1) to receive Call Home notifications
for power, fan, and temperature-related events.
Optional. Configures predefined short-text
destination message profile to receive Call
Home notifications for power, fan, and
temperature-related events.
Purpose
Enters configuration mode.
Enters Call Home configuration submode.
Optional. Configures the message level urgency
as 5 and above for the user-defined profile
(test1).
Removes a previously configured urgency level
and reverts it to the default of 0 (all messages are
sent).
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
Call Home Issues
25-5