Cisco 9134 - MDS Multilayer Fabric Switch Troubleshooting Manual page 92

SSM Issues
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
To install an EPLD image on a switching, services, or supervisor module, follow these steps:
Log in to the switch through the console port, an SSH session, or a Telnet session.
Step 1
Issue the show version command to determine which Cisco MDS SAN-OS release is running on the
Step 2
MDS switch.
switch# show version
Cisco Storage Area Networking Operating System (SAN-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2005, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
BIOS:
loader:
kickstart: version 2.1(2) [build 2.1(2.47)] [gdb]
system:
...
Step 3 If necessary, upgrade the Cisco MDS SAN-OS software that is running on your switch.
Step 4 Issue the dir bootflash: or dir slot0: command to verify that the EPLD software image file
corresponding to your Cisco MDS SAN-OS release is present on the active supervisor module. For
example, if your switch is running Cisco MDS SAN-OS Release 2.1(2), you must have
m9000-epld-2.1.2.img in bootflash: or slot0: on the active supervisor module.
switch# dir bootflash:
12288 Jan 01 00:01:07 1980 lost+found/
2337571 May 31 13:43:02 2005 m9000-epld-2.1.2.img
...
You can find the EPLD images at the following URL:
http://www.cisco.com/cgi-bin/tablebuild.pl/mds-epld
If you need to obtain the appropriate EPLD software image file, follow these steps:
Step 5
Download the EPLD software image file from Cisco.com to your FTP server.
a.
Verify that you have enough free space available on the active and standby supervisor memory
b.
devices that you plan to use, either bootflash: or slot0:. The download site on Cisco.com shows the
size of the EPLD image file in bytes.
The following example shows how to display the available memory for the bootflash: devices on the
active and standby supervisor module.
switch# dir bootflash:
14765056 Mar 21 15:35:06 2005 m9500-sf1ek9-kickstart-mz.2.1.1.bin
15944704 Apr 06 16:46:04 2005 m9500-sf1ek9-kickstart-mz.2.1.1a.bin
48063243 Mar 21 15:34:46 2005 m9500-sf1ek9-mz.2.1.1.bin
48036239 Apr 06 16:45:41 2005 m9500-sf1ek9-mz.2.1.1a.bin
Usage for bootflash://sup-local
141066240 bytes used
184559616 bytes total
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
3-10
version 1.0.8
version unavailable [last: 1.0(0.267c)]
version 2.1(2) [build 2.1(2.47)] [gdb]
12288 Jan 01 00:01:06 1980 lost+found/
43493376 bytes free
Chapter 3 Managing Storage Services Modules
OL-9285-05