Cisco AJ732A - MDS 9134 Fabric Switch Release Note

Converged network switches for nx-os 4.0(1a)n1(1)

Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:

Download this manual See also: Configuration Manual, Release Note

Release Notes

HP C-series Nexus 5000

Converged Network Switches

for NX-OS 4.0(1a)N1(1)

This document provides additional information about the Nexus 5000 Converged Network

Switch

Printed in the U.S.A.

Product names mentioned herein may be trademarks of their respective companies as reflected by an

associated footnote. The information in this document is subject to change without notice.

Part Number: AA-RWQ2A-TE

June 2009

Page 1: Release Notes
Converged Network Switches for NX-OS 4.0(1a)N1(1) This document provides additional information about the Nexus 5000 Converged Network Switch © 2003 - 2009 Hewlett-Packard Company Part Number: AA-RWQ2A-TE Printed in the U.S.A. June 2009 Product names mentioned herein may be trademarks of their respective companies as reflected by an...
Page 2 REFER TO THE CISCO NEXUS 5000 NX-OS RELEASE NOTES FOR A COMPLETE LIST OF NEW FEATURES AND OTHER INFORMATION PERTINENT TO THIS RELEASE As part of the NX-OS 4.0(1a)N1(1) image updates provided by HP, the Cisco Nexus 5000 Series Release Notes for 4.0(1a)N1(1) have been included in the bundle. For a complete list and detailed description of features included in the NX-OS 4.0(1a)N1(1) release, refer to the Cisco release notes as appropriate.
Page 3: Serial Port
SERIAL PORT You must use the serial interface to configure the switch management IP address. Refer to the Cisco Nexus 5000 Series Hardware MDS 9000 Family Configuration Guide for instructions on how to connect the serial port to a host machine. INITIAL INSTALLATION RECOMMENDATIONS FOR SETTING UP FC The C-series Nexus 5000 Family of switches does not automatically allow FCoE connectivity for...