Warning: Not All Switches Are Ivr Nat Capable Or Are Unmanageable; Error: The Following Switches Do Not Have Unique Domain Ids - Cisco 9134 - MDS Multilayer Fabric Switch Troubleshooting Manual

Troubleshooting the IVR Wizard
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Warning: Not All Switches Are IVR NAT Capable or Are Unmanageable

Symptom
Table 13-15 Not All Switches Are IVR NAT Capable or Are Unmanageable
Symptom Possible Cause
Warning: Not all One or more switches in the fabric
switches are IVR are not running Cisco MDS SAN-OS
NAT capable or are Release 2.1(1a) or later.
unmanageable.
One or more switches in the fabric
cannot communicate with Fabric
Manager or are not Cisco SAN-OS
switches.

Error: The Following Switches Do Not Have Unique Domain IDs

Symptom
Table 13-16 The Following Switches Do Not Have Unique Domain IDs
Symptom Possible Cause
The following The listed switches have duplicate
switches do not have domain IDs in two or more VSANs in
unique domain IDs. your proposed IVR configuration.
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
13-16
Warning: Not all switches are IVR NAT capable or are unmanageable.
The following switches do not have unique domain IDs.
Solution
Upgrade to the Cisco SAN-OS release required for the IVR
features you want to use. See
"Troubleshooting Installs, Upgrades, and Reboots."
Determine if any of the problem switches are required in the
IVR topology. If not, ignore this message and proceed with
the IVR configuration. If they are required, choose Switches
and check the Status column to determine the cause and
address the problem.
Solution
Choose Fabricxx > All VSANS > Domain Manager and set
the ConfigDomainId to a unique number and set the Config
Type drop-down menu to static in Fabric Manager. Set the
Restart drop-down menu to disruptive and click Apply
Changes. This triggers a disruptive restart to make the
running domain ID match the configured domain ID.
Use IVR NAT. This may require upgrading to Cisco MDS
SAN-OS Release 2.1(1a) or later.
Chapter 13 Troubleshooting IVR
Table 13-1 and Chapter 2,
OL-9285-05