Troubleshooting The Ivr Wizard - Cisco 9134 - MDS Multilayer Fabric Switch Troubleshooting Manual

Chapter 13 Troubleshooting IVR
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Symptom
Table 13-14 CFS Merge Failed
Symptom Possible Cause
CFS merge failed. IVR topology incorrect.
Maximum number of VSANs or IVR
VSAN topology entries reached.
Conflicting entries in the AFID
database.
Conflicting user-configured IVR
VSAN topology database entries.

Troubleshooting the IVR Wizard

The IVR wizard in Fabric Manager simplifies the process of configuring IVR across your fabric. The
IVR wizard automatically checks for the appropriate Cisco SAN-OS version across the switches in the
VSAN and determines which IVR features the switches are capable of. (See
This section describes the following warning or error dialog boxes that display when you configure IVR
using the Fabric Manager IVR wizard:
•
•
•
•
OL-9285-05
CFS merge failed.
Warning: Not All Switches Are IVR NAT Capable or Are Unmanageable, page 13-16
Error: The Following Switches Do Not Have Unique Domain IDs, page 13-16
Error: Pending Action/ Pending Commits, page 13-17
Error: Fabric Is Changing. Please Retry the Request Later, page 13-17
Solution
Choose Fabricxx > All VSANs > IVR and select the
Action tab in Fabric Manager. Check the Auto Discover
Topology check box and click Apply Changes. Select the
CFS tab and set ConfigAction to commit and click Apply
Changes.
Or use either the ivr vsan topology auto CLI command to
automatically reconfigure the IVR topology, or the ivr
vsan topology database CLI command to manually
reconfigure the IVR topology.
Reconfigure your fabric before merging to reduce the
number of VSANs or topology entries. See
"Configuration Limits for Cisco MDS SAN-OS Release
3.x."
Modify the conflicting entries in the AFID database.
Enable IVR auto topology on both fabrics before the merge
and remove any user-configured IVR VSAN topology
database entries.
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
Troubleshooting the IVR Wizard
Appendix C,
Table 13-1.)
13-15