Hot Swap Replacing, Removing Or Installing The Cooling Module; Hot Swap Replacing The Cooling Module; Figure 52. Accessing The Cooling Module - Intel SSR212CC User Manual

Hot Swap Replacing, Removing or Installing the Cooling
Module
The cooling module is located centrally within the enclosure, installed between the drive
bays and the server board.

Hot Swap Replacing the Cooling Module

1. Observe all safety and ESD precautions listed in
2. To access the cooling module location, release the lock by turning the screw a quarter
turn until the open lock symbol aligns with the notch in the chassis (see letter "A" in
the following figure). Press in on the palm latch (see letter "B"), and slide the
enclosure cover back (see letter "C") until it stops (about 2 inches), revealing the
mounting brackets for the cooling module.
Intel® Storage System SSR212CC User Guide
C

Figure 52. Accessing the Cooling Module

Hardware Installations and Upgrades
Appendix D, "Safety
B
Information".
A
TP01851
47